Lumasense-technologies ISR 320 Instrukcja Użytkownika Strona 25
- Strona / 46
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
ISR 320 Manual Software InfraWin 25
5 Software InfraWin
The operating and analyzing InfraWin software is included with delivery of the pyrometer. In
addition to allowing you to make parameter adjustments, the InfraWin software also provides
temperature indication, data logging, and measurement analysis features.
This section gives an overview about the functions of the software. It also provides a description
of the individual icons found in the program's help menu. Click on the F1 button after loading
InfraWin or click on the ? in the menu bar.
The following descriptions refer to software InfraWin version 5.0. The latest version is available
for free as download from the homepage www.lumasenseinc.com.
5.1 Connecting the pyrometer to a PC
The program InfraWin can operate up to two devices. Two devices using RS485 may be operated
simultaneously by the same interface, if two different addresses have been properly entered
(see section 4.12 Device Address for more information).
5.2 Installation
To install the InfraWin software, select setup.exe from the InfraWin-CD or from the downloaded
and unpacked zip file from the internet and then follow the installation instructions.
5.3 Program start
The first time you load InfraWin 5, you will be prompted to select a default language. The
InfraWin software is available in German, English, Spanish, French, Portuguese, and Chinese.
Once installed, click Language/Languages if you would like to select another language.
On the start page, the screen shows the following start menu icons.
Opens a saved file
Storage of measured values for further processing
Starts measurement for the selected device
Setting of the parameters of the instruments
Time interval between two measurements
Listing of measured or stored values in tabular form
Processing of measured (stored) readings in graph form
Processing of measured (stored) readings in a text file
Calculation of spot sizes in various measuring distances
Only if available: controls the programmable controller PI 6000
Search I/O module
- IMPAC Pyrometer 1
- Contents 3
- ISR 320 Manual Contents iv 4
- 1 General Information 5
- 1.4 Unpacking the Instrument 6
- 2 Introduction 9
- 2.4 Dimensions 11
- 2.5 Physical User Interface 11
- 2.6 Accessories (optional) 11
- 2.6.3 Air Purge 12
- 2.6.4 90° Mirror 12
- 2.6.5 Scanning Mirror 12
- 2.6.6 Flange System 12
- 3 Controls and Installation 13
- 3.1.3 Connection to RS485 14
- 3.2 Sighting 15
- 3.3 Optics 16
- 4.1 Emissivity 17
- 4.2 Emissivity Slope K 17
- 4.3 Transmittance 19
- 4.4 Response Time (t 19
- 4.5 Clear Peak Memory (t 19
- 4.6 Analog Output 20
- 4.7 Relative Signal Strength 21
- 4.8 “Dirty Window” Warning 21
- 4.10 Operating Modes 21
- 4.11 Sub Range 22
- 4.12 Device Address 22
- 4.13 Baud Rate 22
- 4.15 Limit Switch (SP1) 22
- 5 Software InfraWin 25
- 5.4 Basic settings 26
- 5.5 Relative Signal 27
- 5.8 Measurement online trend 29
- 5.9 Listing (analyzing) 29
- 5.11 Trend output (analyzing) 30
- 5.13 Spot size calculator 30
- 5.14 Search I/O Module 31
- 6 Maintenance 33
- Protocol) 35
- for one 36
- =0.100 to 1.000 36
- 8 Reference Numbers 39
- 9 Troubleshooting 41
- ISR 320 Manual Index 45 45
- ISR 320 Manual 46 46
Powiązane produkty i podręczniki dla Narzędzia Lumasense-technologies ISR 320
(44 strony)
(24 strony)AEG Electrolux L75274ESL manuali
Manuali dei proprietari e guide per l'utente per no AEG Electrolux L75274ESL.
We fornisce 7 manuali pdf AEG Electrolux L75274ESL per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Komentarze do niniejszej Instrukcji